® SpreadStone Textured Stone Coating

Please note that while we strive for colour accuracy, actual product colours may vary slightly from the samples shown above.

These sample colors are created in a “two tone effect”. This means the color is applied and then the same color is applied over the main color however the second application is tinted 40% lighter and ¼ of the material is used on the second coat.


COVERAGE (per gallon)
Thin skim-coats: up to 130 sq.ft. 

Light texture coats: 70 to 100 sq.ft. 

Heavier texture coats: 45 to 70 sq.ft. 

Coverage will vary with roughness of surface and application thickness.

COVERAGE (per 5 gallons):
Thin skim-coats: up to 650 sq.ft. 

Light texture coats: 350 – 500 sq.ft. 

Heavier texture coats: 225 – 350 sq.ft. 

For sponge highlights, quarts or gallons are usually sufficient. Coverage will vary with roughness of surface and application thickness.

Distinctive Decorative Stone Resurfacing

You can salt it, shovel it, drive your car on it. It can bake in the sun … it can sit for months beneath the snow. It can be your garage floor — or your kitchen floor.

SpreadStone™ is a versatile pre-mixed stone coating that adds outstanding beauty and durability to all kinds of interior and exterior surfaces.

Get the look natural stone or ceramic tile — at a fraction of the cost of the real thing.

Features & Benefits

Where to Use

U/V & Heat

For even the toughest

Real Stone

Our products are 100% real stone coatings.

Extreme Cold Resistant

Built Alaska


Because safety
comes first.


Industrial strength


Stay dry,
stay safe.

Trowel or squeegee it on with ease.

Step 1

Roll on a coat of Textured Primer

Let dry for 1-2 hours.

Step 2

Apply two coats of SpreadStone

Let dry for 1-2 hours between coats.

Step 3

Seal with Hi-Build Ultra or TracSafe

Let dry for 24 hours.

Installation Videos

See what our customers
have created.

Customer Reviews


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Order by Phone