LuxWeave Adorn your walls with finely spun glass, elegantly woven into stunning, high performance textile wallcoverings
Loading...

Nouveau mélange de pierres de première qualité pour une finition des plus élégantes.

The SpreadStone Countertop Kit offers shimmering mineral accents and color highlights found in natural mined rock that Rolls right On. Never before has it been this easy or economical to add the functionality and visual appeal of real premium stone to all kinds of surfaces, without the need for careful artistic skill.

Le nouveau nécessaire de restauration de comptoir SpreadStone Mineral Select™ est un procédé simple et rapide, réalisé en trois applications simples et rapides au rouleau. Cela signifie qu’en une seule fin de semaine, vous pouvez prendre des surfaces de comptoirs et de tables existantes en stratifié, MDF, contreplaqué, panneaux de particules, béton, carrelage - et les transformer toutes en surfaces durables et résistantes aux taches grâce à la conception élégante de la pierre véritable.

Caractéristiques et avantages

Où l’utiliser

Résistant aux rayons U/V et à la chaleur

Pour les climats les plus rigoureux

100%
pierre véritable

Nos produits sont des revêtements de pierre véritable à 100 %

Résistant au froid extrême

Des produits conçus pour l’Alaska

Traction supérieure.

Parce que la sécurité passe avant tout.

Robustes

De qualité industrielle

Imperméable

Restez au sec, restez en sécurité

Appliquez-le en étapes faciles.

Appliquez une couche d’apprêt texturé au rouleau.

Laissez sécher de 1 à 2 heures.

Roll on 2 coats of RollerRock

Laissez sécher de 1 à 2 heures entre les couches.

Appliquez le fini transparent Hi-Build Ultra ou le scellant antidérapant TracSafe.

Laissez sécher pendant 24 heures.

Voyez ce que nos clients ont créé.

Questions fréquemment posées

The differences lie in their finished appearance and coverage as follows:

The Mineral Select Kit is made with a modified blend of stone and mineral ingredients that goes on slightly thicker for optimized visual appeal with natural mineral accents. Coverage rates for the Mineral Select kit run between 30 and 35 sq.ft. To be safe, when planning for your project, base your ordering on 30 sq.ft. to ensure you have enough.

The original SpreadStone Countertop Kit is made with an alternate stone blend that delivers a soft, multi-colored decorative speckled finish. While this kit does not include the mineral mix found in the Mineral Select kit, it provides higher coverage at 50 sq.ft.

Both products offer the same level of performance and ease of application.

The kit comes with all required coatings and application tools.

Not at all. The entire SpreadStone™ system is practically odorless and safe to use.

After clear coat application, wait until the following day to resume use.

Yes, just employ the same techniques.

You have complete control. Leave your countertop softly textured or perfectly smooth. It's completely up to you.

It's not an epoxy product, so there's never any waste. Just close the can and save it for later. Use it on a table, vanity, bartop or other surface.

You want the grout lines to be filled so that they are flush with the rest of the surface before applying your new countertop finish. Use more grout, thinset mortar or other suitable filler and let it cure fully before proceeding. Next, cover the entire surface with a thin coat of Daich ElastoLock® (one quart is usually more than enough), which will effectively adhere to the tile and create a uniform bonding surface. Let it dry until the following day, at which time you can proceed as directed with the countertop finish of your choice.

Yes! Scratch up the surface with steel wool and then wash it thoroughly. When it is dry, cover the entire surface with a thin coat of Daich ElastoLock®, which will effectively adhere to the surface and create an optimal bonding surface. Let it dry until the following day, at which time you can proceed as directed with the countertop finish of your choice.

Yes, wood surfaces like tables and furniture and also newly constructed surfaces are finished with the SpreadStone Countertop Kits all the time. Specific woods would include clean and dry plywood, MDF, particle board, pine, and various hardwoods. Certain woods which may be subject to color bleed should be pre-coated with a stain-blocking primer. Otherwise, the surface should be free of coatings or, if coated, free of any peeling and weakness. All surfaces should be lightly scuffed and wiped clean prior to application of a thin coat of Daich ElastoLock®. Let it dry until the following day, at which time you can proceed as directed with the countertop finish of your choice.

Commander par téléphone