RollerRock® is the easy roll-on concrete coating that adds the beauty and durability of stone to almost any existing surface. No complex techniques. No fancy tools. Just a roller or brush — and NO PRIMER required!
Available in fifteen standard colors RollerRock accents lots of surfaces with a clean speckled stone appearance. Just pour it into a tray and roll or brush it uniformly over your desired surface. Go seamless, flagstone, or tiled.
Using common painting skills, you may be surprised at how simple it can be to produce attractive, high performance floor finishes with excellent resistance to:
• Water • UV Rays • Salt • Chemicals
• Impact & Abrasion • Hot-Tire Pickup • Freeze/Thaw Conditions • Mold & Mildew
If you can roll paint – You
• Porches & Steps
• Pool Decks and Patios
• Walkways and Entrances
• Garage, Utility Floors
• Basement Floors
• Balconies ... and more
Applying Your New RollerRock® surface is a fast and easy 2-step process. Here's how...
Your total cost per sq.ft.
(Complete with RollerRock and
Hi-Build Ultra Clear Sealer)
"We wanted a decorative concrete finish that would make our properties look great and make walking surfaces safer too. RollerRock delivered — with beauty and outstanding anti-slip performance!" –
J. D'Ambrosio, Property Manager
Choose From 15 Popular Colors...
1) How is RollerRock® different from paint?
Simply...RollerRock IS NOT paint. It is a high performance concrete coating made of STONE. Paint is only a super-thin layer of colour in a bonding resin that sticks to your concrete for a short time until it is scrubbed off under foot traffic or tires — or quickly scoured away by seasonal climate extremes. In contrast, the STONE that makes up RollerRock is a time-tested shield that comes to you direct from nature!
2) What is the coverage rate of RollerRock?
RollerRock is applied in your choice of two textured finishes, each with it's own application thickness and resulting coverage rate. The "stone texture" finish is the most commonly applied RollerRock finish with a coverage rate between 80 - 100 sq.ft. per gallon. RollerRock's other finish is called the "tile texture" finish. It goes on a bit thicker with an average coverage rate of 60 - 70 sq.ft. per gallon.
3) What is the difference between the stone and tile texture finishes?
The "stone texture" finish is applied with the "Stone Texture Roller" and is primarily used outdoors where a more rustic, anti-slip surface is required. Two coats 2 - 4 hours apart are recommended for the most durable, uniform and attractive results.
The "tile texture" finish is applied with the "Tile Texture Roller" for a smoother more refined result that resembles a speckled tile finish. The Tile Texture finish can be applied in just one coat — or for the ultimate durable finish, in two coats to form a very tough stone layer.
4) Is RollerRock recommended for a garage floor?
RollerRock is a uniquely beautiful finish for any garage floor. We recommend the tile texture finish for garage floors for its superior cleanability and refined, solid appearance. It stands far apart from stereotypical epoxy / flake garage floor finishes and imparts a tough, slab-like stone surface with extreme resistance to hot tires. Top-coat with Daich DaiHard Epoxy Clear Coat for a beautiful, lasting finish.
5) I've never heard of RollerRock. Is this stuff new? How do I know it works?
RollerRock has been installed throughout North America — from Alaska to Miami — for ten years, with an outstanding performance track record. It draws much of it's technical superiority from other Daich stone coatings which have been used on millions of square feet of concrete for almost 25 years.
6) Can RollerRock add foot traction to my slippery exterior steps?
Yes. In fact, in laboratory testing, RollerRock's "stone texture" finish, applied as directed, delivered an anti-slip score of 0.093 — almost TWICE the OSHA recommended standard.
To enlarge images, hover your mouse pointer over the color squares.
Get RollerRock for your interior and exterior concrete at these ordering locations...